Pinnacle Technology PP7X Series, Руководство по эксплуатации

Страница: 53 / 76

50
14 COMMANDS
The command explanations include the following parts:
1
）
Name and the general description of the command’s function
---This is the first part for the command
description; it presents the command’s ASCII code format and general description of its function.
2
）
Format
---This part used ASCII coding form, decimal code, and hex code to describe the command.
3
）
(Parameter) Range
---This part gives the range of the variable. If there is special explanation, it should be the
decimal value. E.g. 1 ≤ n ≤ 4
，
in which the number ‘1’ is the decimal value, but the ASCII coding form.
4
）
Description
---This part is to explain the command in detail.
5
）
Note
---This part gives the attention items of the command. As the commands may interfere with each other
when they are used in different modes or when they co-work with different commands, yet this part gives the
details for these attention items.
Command Decimal Hex Function
LF 10 0A Print and line feed
FF 12 0C Print and recover to page mode
CAN 24 18 Cancel print data in page mode
CR 13 0D Print and carriage return
ESC FF 27 12 1B 0C Print data in page mode
ESC \ 27 92 1B 5C Specify relative position
ESC S 27 83 1B 53 Select standard mode
ESC T 27 84 1B 54 Select character print direction in page mode
ESC ! 27 33 1B 21 Select print mode(s)
ESC - 27 45 1B 2D Turn underline mode on/off
ESC { 27 123 1B 7B Turn upside-down printing mode on/off
ESC 2 27 50 1B 32 Select default line spacing
ESC 3 27 51 1B 33 Set line spacing
ESC D 27 68 1B 44 Set horizontal tab positions
HT 9 09 Horizontal tab
ESC SP 27 32 1B 20 Set right-side character spacing
ESC J 27 74 1B 4A Print bitmap lattice data, and feed n lines
ESC L 27 76 1B 4C Select page mode
ESC $ 27 36 1B 24 Set absolute print position
ESC W 27 87 1B 57 Set printing area in page mode
ESC @ 27 64 1B 40 Initialize printer
ESC = 27 61 1B 3D Select printer on or off
ESC * 27 42 1B 2A Select bit-image mode
ESC v 27 118 1B 76 Transmit paper sensor status
DLE EOT 16 4 10 04 Transmit real-time state
FS ! 28 33 1C 21 Set Chinese characters mode
FS S 28 83 1C 53 Set Chinese character space amount
ESC i 27 105 1B 69 Execute partial-cut
GS V 29 86 1D 56 Select paper-cut mode and cut paper
ESC p 27 112 1B 70 Bring impulse