Function description
Operating Manual PSSu K F FAU B, PSSu K F FAU P
1003434-EN-05
| 40
TOOL CHANGE state
Users can request TOOL CHANGE state via the web interface (see web interface:
Tool
Change
). In TOOL CHANGE state the tool contour is identified and a tool class assigned.
TOOL CHANGE state can be ended either via the web interface or via an operating state
with higher priority (e.g. requesting STANDBY state via the PSS 4000 user program, HALT
state, ERROR state, IDLE state due to ending the operating state "Device in RUN state
without error" on the safety controller).
In TOOL CHANGE state, PSENvip will not process the following requests:
}
Switching to MEASUREMENT state (request via the add-on module PSENvip IPM)
}
Firmware update (request via the web interface)
The firmware update option is deactivated in the web interface.
TOOL CHANGE
RUN
HALT
Web interface: Tool Change
Request TOOL CHANGE
Request TOOL CHANGE
End TOOL CHANGE
Fig.: Request/end TOOL CHANGE state
