Pillar UniFoiler 3000, Руководство оператора

Страница: 12 / 39

6
Installation
The support must be mounted so that the coil will lie parallel to the conveyor's surface. It is
important that the gap between the top of the bottle cap and the bottom of the coil remain
constant as the bottle passes underneath. Verify this by mounting a coil and measuring the
distance from each end down to the conveyor track or belt as shown in Figure 2.
Figure 2 – Checking that the coil is level
On narrow conveyors, it may be necessary to space the support away from the rear side of the
conveyor.
Hand Held Coil Support
The hand held coil design is made to be held by the operator during the capsealing process. The
bottom of the coil which faces the top of the cap has a small opening which will allow dispenser
style caps to fit inside for proper sealing. Figure 3 on page 7 shows the relationship between the
coil opening and the sealing range of caps to be sealed.
The coil can become quite heavy after continuous usage and may be suspended from a lifting
device of some sort to offset the coil weight and ease operation. Caution must be used to ensure
that no metal components are positioned in the sealing field on the bottom of the coil.