PIKA REbus Beacon, Руководство по установке

Страница: 8 / 12

8 REbus Beacon Installation Manual M00020-01
Instructions
Connect the ethernet and power cable assembly to Beacon
1. Connect the ethernet cable to the ethernet port on the top face of Beacon.
2.
Connect the power cable to the micro USB port on the right-hand face of Beacon, near
the bottom.
3. Feed any slack wire back through the passthrough into the wiring compartment. Keep
all wires neatly managed.
Connect the USB cable
1. The type-B (square shaped) connector plugs in to a port inside the inverter Power
Core. Remove the black plastic plug from the ¾” hole in the bottom center of the
Power Core cover to access the port and plug in the cable
2. Connect the type-A (rectangular shaped) connector to the back right-hand port on the
top face of Beacon.
3. Slip the plastic split-ring grommet over the USB cable, then snap it into place in the
Power Core cover.