PIETRO FIORENTINI REVAL 182 Скачать руководство пользователя страница 373

Страница: 373 / 404

373

REV

AL 182

Use, maintenance and warning instructions

MEDIUM PRESSURE REGULATOR

MAINTENANCE AND FUNCTIONAL CHECKS

REV. 00

Step Action

Insert the valve cover (4) so that the spring (12) rests on the lever of the pressure switch.

NOTICE!

Keep the valve cover (4) tilted for easier assembly.

Push and tilt the valve cover upwards (4).

Insert the valve body (3) together with the stem assembly (5, 6, 7, 8, 9, 10) into the valve cover (4).

NOTICE!

The valve body (3) must be centred with the centring pin (2).

Fasten the screws (24) of the valve body (3).

Fasten the screws (24) of the valve cover (4).

Fit the lever (18).

Insert and fix the screws (19).

Insert the flange (15) into the cylinder (14).

Insert the gasket (16) into the cylinder (14) with the flat side facing upwards.

Insert the flange (13) into the cylinder (14).

Insert the screws (23).

Fit the quick discharge assembly (13, 14, 15, 17) into the valve body (3).

Fix the screws (23).

Fit the cover (119) together with the gasket (139).

Insert and fix the screws (122) of the pressure switch.

Tab. 9.182.

WARNING!

Ensure that all parts have been fitted correctly.

Содержание REVAL 182





















































































































































































































































































































































































































Результаты поиска

Содержание REVAL 182

Отзывы:

Похожие инструкции для REVAL 182

Бренды по названию

Популярные бренды

PIETRO FIORENTINI REVAL 182, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание REVAL 182

Отзывы:

Похожие инструкции для REVAL 182

Бренды по названию

Популярные бренды