PIETRO FIORENTINI REVAL 182 Скачать руководство пользователя страница 225

Страница: 225 / 404

225

REV

AL 182

Use, maintenance and warning instructions

MEDIUM PRESSURE REGULATOR

MAINTENANCE AND FUNCTIONAL CHECKS

REV. 00

Step Action

Unscrew and remove the screws (31) securing the control head to the regulator body (1).

NOTICE!

Support the head assembly during this step to avoid falls.

Remove the control head and place it on its side in a plane with an impact-resistant surface.

NOTICE!

Take care not to damage the plug profile (5).

Remove the O-ring (37) from the plug guide (2) and replace it, taking care to lubricate it with synthetic grease.

NOTICE!

Before inserting the replacement O-ring, clean the retaining slots with a cleaning solution.

Unscrew the lock nut (9).

NOTICE!

Take care not to damage the plug profile (5).

Remove the plug (5) and place it on a table with an impact-resistant surface.

Remove the spring (54) together with the spacer (22).

Remove and replace the I/DWR rings (52) from the plug guide (2).

NOTICE!

Before inserting the replacement I/DWR rings, clean the retaining slots with a cleaning solution.

Remove the O-ring (35) from the plug guide (2) and replace it, taking care to lubricate it with synthetic grease.

NOTICE!

Before inserting the replacement O-ring, clean the retaining slots with a cleaning solution.

Clean the plug (5) and the plug guide (2) lubricating with silicone grease.

Unscrew and remove the nuts (26) together with the screws (25).

Remove the upper cover (3).

Remove the indicator rod (18) from the rod guide (17).

Unscrew and remove the top screws (27) from the top cover (3).

Separate the upper cover (3) from the eyebolt flange (14).

Take out the rod guide (17).

Remove the O-rings (39, 47) from the eyebolt flange (14) and replace them, taking care to lubricate them with
synthetic grease.

NOTICE!

Before inserting the replacement O-rings, clean the retaining slots with a cleaning solution.

Содержание REVAL 182





















































































































































































































































































































































































































Результаты поиска

Содержание REVAL 182

Отзывы:

Похожие инструкции для REVAL 182

Бренды по названию

Популярные бренды

PIETRO FIORENTINI REVAL 182, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание REVAL 182

Отзывы:

Похожие инструкции для REVAL 182

Бренды по названию

Популярные бренды