Here are some useful tips on how to get the most out of your Picote
system. Always use the recommended tools for maintenance to avoid
personal injury.
Always inspect the outer casing before each
use. The easiest and safest way to shorten the
outer casing to the correct length is using a
sheath cutter. Only the necessary amount of
bare shaft should be exposed at any time.
CUTTING THE OUTER CASING
SHAFT ROUNDER
The Shaft Rounder is used to smooth the end
of the flexible shaft, preventing the user from
being cut by the otherwise sharp metal edge .
CUTTING THE FELXIBLE SHAFT
www.picoteinstitute.com
Picote Solutions Oy Ltd
25
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
PRACTICAL TIPS & SAFETY ADVICE
Always inspect the flexible shaft before each
use. Run the machine briefly in clockwise di-
rection to allow the shaft to return to it’s
resting position. If there are potential weak
points or the shaft is damaged, cut off the
damaged length using a band saw. For most
tools, the shaft should extend ~40mm (1 ½”)
past the casing. Hubs and Original chains with-
out a leader require more exposed shaft.
