Step 3.
Remove the old Silicone Spring
and replace it with a new one. Be care-
ful not to drop axles from the heart of
the clutch. Repeat the steps in
reverse
order
.
Step 4.
The correct way to install shaft
into the safety clutch is shown below.
There should only be 3mm or 1/8” in
-
between the outer casing and safety
clutch. Push the shaft all the way to the
end of the safety clutch.
Recommended : use Loctite 542.
www.picoteinstitute.com
Picote Solutions Oy Ltd
21
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
MAINTENANCE
INSPECTING FLEXIBLE SHAFT FOR DAMAGE
Carefully inspect the flexible shaft and its casing on a regular
basis to ensure that there are no signs of wear and tear.
Change the flexible shaft and casing as and when required.
Damaged shaft needs to be trimmed back before attaching
tools (see examples to right).
