PIAGGIO VESPA RALLY 200, Эксплуатация и обслуживание

Страница: 6 / 35

OPERATING INSTRUCTIONS
Operation Instructions
SECURITY LOCK
1. - Steering lock.
a) Locking the handlebars
To lock the vehicle, turn the handlebars
anticlockwise up to the limit stop; rotate the key
anticlockwise and push inwards. So that it thrusts
the sliding bar against the steering column
(see fig. 3).
To ease the insertion of the sliding bar into the
hole of the steering column, slightly turn the
handlebars from the limit stop clockwise. When
the handlebars are locked the key will now spring
back to its original position and can then be
withdrawn.
b) Unlocking the handlebars To release the handlebars, insert the key in the lock,
turn it to the left and pull it back; then turn the
handlebars in the normal position.
NOTES
The vehicle is provided with two security locks, the one relates to the steering column
and the other one for locking the front tool box. Both operated by the same key. The key
can be extracted from the lock even if the handlebars a r e free. The security locks should not
be lubricated, eventually use colloidal graphite.
2. Front tool box lock To open the flap door of the front box insert the
key in the lock and turn it fully anticlockwise, then
slide down the external plaque of the lock (fig.
4). In order to close it, close the flap door until
the lock clicks against the tool box; then turn
the key clockwise and withdraw.
BEFORE OPERATING THE VEHICLE
Unscrew the plug on the gear box marked
"OLIO" - (fig. 16) and check that the oil is on a
level with the hole when the vehicle is standing
upright.