OPERATING INSTRUCTIONS
Operation
Instructions
FUEL SUPPLY
Use a mixture of gasoline (petrol) and
pure
mineral Oil SAE 30 at 2°/°: (Esso 2 - T Motor Oil;
Shell Golden Motor Oil, Shell X - 100 2 T; Total 2
T)
. The mixture should be at 2% of oil by
volume (
1
/4 pint of oil to 1
1
/2 gals of gasoline
(petrol). For access to fuel tank pivot the saddle
on its forward edge, after having released the
rear attachment as shown at fig. 2.
NOTES
Ensure that the fuel tank breather Is always clean.
Use a mixture 2% by volume
during and after running – in.
For running in first 2000 Km. (1200 mls), do not maintain the throttle fully open for
long periods.
- After first 1000 Km. (600 mls)
change oil in gear box (page 23) and check that all
nuts and bolts are tight.
- Check tire pressure: Front:
1.2 Kg/cm' (17 lbs;/sq. in. );
Rear:
1.75 Kg/cm
2
(25
lbs/sq. in.) with one up;
Rear:
2.5 Kg/cm' (35 lbs/sq. in.) with two up.
1.
Group carburettor air cleaner -
2.
Piston -
3.
Crankshaft -
4.
Clutch -
5.
Drive shaft
and gear pinions assy. -
6.
Gear shifter -
7.
Flywheel magneto -
8.
Kick starter.
Fig. 5 – Engine Section
Содержание VESPA RALLY 200
