PIAGGIO 500 cc, Руководство по обслуживанию

Страница: 163 / 239

Fuel injection
9 - 51
9
The pressure reduces much more slowly
Proceed with controls and possible replacement of
the injector due to insufficient seal
(see page 9-62 and Chapter. 7-THERMAL UNIT
AND TIMING SYSTEM).
Rate variations are not evaluated
Repeat the test by squeezing the tube of the
special tool 020480Y in the tract between
the derivation and the injector. Check if
pressure reduces much more slowly.
NO YES
Rate variations are not evaluated
Repeat the test by squeezing the tube of
the special tool 020480Y in the tract be-
tween the derivation and the injector.
Check if pressure reduces at the same rate
as when the system is free.
The unidirectional pump valve is defective
Replace the pump (see page 9-54 - overhaul
of the pump support).
Check seal of the tubes and the injector.
joint more accurately.
If necessary repeat seal controls of the
components.
NOTE : poor system seal only prejudices readiness at ignition stage.