5 Installation
32
Version: 1.1.1
MP160E
V-551 Linear Stage
Figure 14: Mounting holes for affixing the load; from the left: V-551.2D, V-551.4D, V-551.7D
The arrows identify the following mounting holes in the motion platform of the V-551:
White arrows:
M4 threaded holes, depth 5.5 mm
Gray arrows:
M4 threaded holes, depth 4.5 mm
Black arrows:
M4 threaded holes, depth 8 mm
Requirements
You have read and understood the general notes on installation (p. 15).
You have properly mounted the stage onto a surface (p. 16) or on a V-551 (p. 21).
The V-551 is
not
connected to the controller.
You have prepared the load so that it can be affixed to the motion platform (for the
required position and depth of the holes for accommodating the screws, see
"Dimensions" (p. 50)):
−
The distance between the center of gravity of the load and the center of the motion
platform is as small as possible in all directions.
−
At least three points are provided for affixing the load on the motion platform.