PI NEXACT Stage N-565 Series, Руководство пользователя

Страница: 21 / 47

5 Installation
N­565 NEXACT® Linear Stage MP148E Version: 1.4.0 17
NOTICE
Excessively long screws!
Screws inserted too deeply can damage the N-565.

Pay attention to the depth of the mounting holes (p. 36).

Only use screws of the correct length for the respective mounting holes.
NOTICE
Protruding screw heads!
Protruding screw heads can damage the N-565.

Ensure that the screw heads do not protrude from countersunk holes so that they do not
interfere with the motion.
Requirements

You have read and understood the general notes on installation (p. 13).

You have provided a suitable underlying surface. For the required position of the holes,
see "Dimensions" (p. 36).
− For mounting from above with M3x12 screws : Four M3 holes with a depth of at
least 5 mm are provided.
− For mounting from below with M4 screws : Four through-holes are provided for M4
screws. The thickness of the underlying surface and the depth of the counterbores
for the through-holes in the underlying surface are matched so that compliance
with the maximum screw-in depth of 7.5 mm in the N-565 is adhered to.
−
The surface flatness is ≤10 µm.
−
For applications with large temperature fluctuations:
The surface should have the same or similar thermal expansion properties as the
N-565.

You have accounted for the space required to route cables according to regulations and
without bending them.
Tools and accessories

Screws according to the selected mounting option (see above):
− Four M3x12 screws, included in the scope of delivery
or
− Four M4 screws of suitable length, not included in the scope of delivery

Suitable screwdriver