PI NEXACT Stage N-565 Series, Руководство пользователя

Страница: 26 / 47

5 Installation
22 Version: 1.4.0 MP148E N­565 NEXACT® Linear Stage
5.5 Connecting the N­565 to the Controller
Figure 9: N-565: Connections
1
HD D-sub 15 (m) drive connector
2
D-sub 15 (f) sensor socket
3
D-sub 15 (m) adapter to HD D-sub 15 (f)
Requirements

You have read and understood the general notes on installation (p. 13).

You have installed a suitable controller (p. 9).

You have read and understood the user manual for the controller.

The controller is switched off.
Tools and accessories

N664B0001 adapter, included in the scope of delivery (p. 9)

Screwdriver for slotted screws (SL)
Connecting the N­565 to the E­861.1A1 controller
1. Connect the positioner's drive connector to the corresponding controller socket (refer
to the user manual for the controller).
2. Connect the positioner's sensor socket to the controller:
a)
Connect the positioner's sensor socket to the plug side of the adapter (D-sub 15
(m)).
b) Use the integrated screws to secure the connectors against accidental
disconnection.
c) Connect the socket side of the adapter (HD D-sub 15 (f)) to the controller's panel
plug (refer to the user manual for the controller).
3. Use the integrated screws to secure the controller's connections against accidental
disconnection.