ProfiNet / ProfiBus interfaces
MA 1263-A010 EN
2
Version
Modification
10
New Data set for the complete axis status inquiry (chap 8.2.)
Lis of Parameters
2015
All rights with:
Phytron GmbH
Industriestraße 12
82194 Gröbenzell, Germany
Tel.: +49(0)8142/503-0
Fax: +49(0)8142/503-190
I
n this manual you will find the feature descriptions and programming a controller for
positioning of a stepper motor.
This manual is supplementary to the “
phy
LOGIC
™-Command References“ and
“Principles of Positioning“.
Every possible care has been taken to ensure the accuracy of this technical manual. All
information contained in this manual is correct to the best of our knowledge and belief but
cannot be guaranteed. Furthermore we reserve the right to make improvements and
enhancements to the manual and / or the devices described herein without prior
notification.
We appreciate suggestions and criticisms for further improvement.
Email address:
Questions about the use of the product described in the manual that you cannot find
answered here, please contact your representative of phytron (http://www.phytron.eu/) in
your local agencies.
dok
