phytron MSD2+, Руководство пользователя

Страница: 31 / 62

Manual MSD2
+
MA 2126
–A005 EN
30
8.5.2 Step Resolution and Current Shaping Rotary Switch
The rotary switch below the DIP switches is used to set the phase current profile.
Step resolution and current shaping rotary switch
Switch
position
Current shaping
0 Full step
1 Half step with DMA with CS
2 Ministep sinusoidal 1/4 with CS
3 Ministep sinusoidal 1/5 with CS
4 Ministep sinusoidal 1/10 with CS
5 Ministep sinusoidal 1/20 with CS
6 Half step with DMA without CS
7 Ministep sinusoidal 1/4 without CS
8 Ministep sinusoidal 1/5 without CS
9 Ministep sinusoidal 1/10 without CS
A Ministep sinusoidal 1/20 without CS
B Ministep sinusoidal 1/4 with CS and BLOW UP
C Ministep sinusoidal 1/5 with CS and BLOW UP
D Ministep sinusoidal 1/10 with CS and BLOW UP
E Ministep sinusoidal 1/20 with CS and BLOW UP
F Half step conventional
DMA= Torque compensation
CS= Current Shaping
BLOW UP= Optimisation of the current shaping
Factory setting
The optimum current shaping should be determined, in each case, by testing various
adjustments.
8.5.3 DIP Switches
The DIP Switches are located behind the front panel beneath the rotary switches for
changing the operating modes.
DIP switch Function Position Meaning
1 Overdrive ON Overdrive activated
2 Boost ON Boost activated
3 Activation ON Motor activation on
4 Pref. motor direction ON
Reversal of the preferential motor direction
Factory settings: 1:ON, 2:OFF, 3:ON, 4:OFF