phytron MSD2+, Руководство пользователя

Страница: 22 / 62

phytron
21 MA 2126
–A005 EN
6.2 Shielding
To avoid interference affecting the wires and instruments installed close to the drive
system, we recommend the use of shielded cables.
The plug-in board, where the MSD2
+
is installed, should be connected to the ground by a
central earthing tab.
Fig. 5: Motor cable shielding
i
Phytron recommends the following ferrites to compensate for possible
interferences:
– enclose the motor cable with the 742 7122 Würth-Elektronik snap ferrite,
– in addition, enclose the control lines (control pulses, direction...) with the
742 711 32 Würth-Elektronik snap ferrite close to the connector.