INSTRUCTIONS FOR
AIR CAULKING GUN
MODEL NO:
AK41.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Disconnect the gun from the air supply before changing accessories, servicing or performing any maintenance.
9
Maintain the gun in good condition. Replace or repair damaged parts. Use recommended parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
9
Keep children and unauthorised persons away from the work area.
9
Avoid unintentional operation.
9
Ensure caulking compound manufacturer’s instructions are carefully followed.
8
DO NOT
hold gun or attachments close to your face (especially eyes, ears, etc.) and do not point gun or air hose at other persons or
animals.
8
DO NOT
carry by the air hose, or yank the hose or the gun from the air supply.
8
DO NOT
use the gun for any purpose other than that for which it is designed
.
8
DO NOT
operate the gun if damaged.
8
When not in use disconnect from the air supply and store in a safe, dry, childproof area.
2. INTRODUCTION
Accepts standard 330ml cartridges. Fitted with trigger control for smooth application of caulking.
3. SPECIFICATION
Model no: ................................................................AK41.V2
Cartridge: ........................................................... 215 x 50mm
Air supply: ................................................................ 30-40psi
Air consumption: .......................................................... 15cfm
Air inlet: .....................................................................1/4”BSP
4. ASSEMBLY
WARNING!
Disconnect the gun from the air supply before
changing
accessories, servicing or performing any
maintenance.
9
The gun is fitted with a 1/4” BSP male coupling. Use of a
9
suitable coupling (not supplied) is required.
9
To maintain the gun in good condition, replace or repair
damaged parts. Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Refer to
instruction
manual
Wear ear
protection
Wear
Gloves
Wear eye
protection
AK41.V2 Issue:3(H, F) 13/03/18
Original Language Version
© Jack Sealey Limited
fig.1
