Phytec phyCORE-P87C591, Быстрый старт

Страница: 68 / 84

phyCORE-P87C591 QuickStart Instructions
64
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
4.5 Raisonance Debug Features
•
The Debugger toolbar gives access to the following debug
commands: Reset, Go, Stop, Step Into, Step Over, Step Out and
Run to Cursor line.
•
RIDE uses Step (into function calls) to single step one line at a
time. Step (into function calls) is also used to enter a function in
the same fashion. Depending on the current window
(either Disassembly or Source), the meaning of “Stepping” will be
slightly different, and automatically adapted to the context. In a
Source window, stepping will be performed at the source level
(e.g. line to line). In a Disassembly window, stepping will be
performed at the instruction level. To Step into, click on the
button, or press <F7>, or open the Debug | Step Into menu.
•
Step (over function calls) means to skip over a function that you
are not interested in. To Step over, click on the
button,
or press <F8>, or open the Debug | Step Over menu.
•
To reach the cursor location, open the Debug | Run to menu.
•
You can reset the application by clicking on the Reset
application button in the debug toolbar. The program will arrive
at
main()
when the Reset is performed from a Source window,
or at the reset vector if it is performed from the Code disassembly
window.
•
The Go icon will change into a Stop icon during the
program execution.
Clicking the Go icon runs the program without active debug
functions. To stop program execution at a desired point, a
breakpoint can be placed before the Go icon is clicked.
The Stop icon interrupts and stops the running program at an
undetermined location.