Phytec phyCORE-P87C591, Быстрый старт

Страница: 32 / 84

phyCORE-P87C591 QuickStart Instructions
28
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
The demo hexfile has already been installed to your hard drive during
the installation procedure.
•
Browse to the correct drive and path for the phyCORE-P87C591
Demo folder (default location
C:\PHYBasic\pC-P87C591\Demos\Raisonance\Hello\Hello.hex
)
and click Open.
•
Click on the Download button. You can watch the status of the
download of the Hello.hex into the external Flash memory in the
Download window.
If the selected Flash bank into which you wish to download code is
not empty (i.e. erased), a warning dialog box will appear,
indicating “Location not empty! Please erase location and try
again”. In this event, select the Bank Utilities tab from the
FlashTools98 tabsheet, highlight Bank #1 and erase the bank. Then
repeat the download procedure.
•
At the end of the download, a sector-by-sector status check of the
Flash memory can be viewed in the lower left corner of the
FlashTools98 tabsheet window. Wait until the status check
finishes before returning to work with the board. Once the status
check is complete, the downloaded code can be executed.
•
Returning to the Communication tab, click on the Disconnect
button and exit FlashTools98.