Phytec phyCORE-P87C591, Быстрый старт

Страница: 49 / 84

Getting More Involved
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
45
3.8.2 Modifying the Example Source
•
Double-click the file Hello2.c from within the project window.
•
Use the editor to modify the printf command:
printf ("\x1AHello World\n")
to
printf ("\x1APHYTEC... Stick It In!\n")
•
Save the modified file under the same name Hello2.c.
3.8.3 Setting Tool Chain Options
The same tool chain options can be used as for the Blinky2 project
described in section 3.5.
3.8.4 Building the New Project
•
Build the project.
•
If any source file in the project contains errors, they will be shown
in an error dialog box on the screen. Use the editor to correct the
error(s) in the source code, save the file and (re-)build the project.
If there are no errors, the code is assembled and linked and the
executable code is ready to be downloaded to the board.