manualshive.com logo in svg

Phytec phyCORE-OMAP44 Series, Руководство по оборудованию

"Серия Phytec phyCORE-OMAP44 - это высококачественные компоненты, предназначенные для интеграции в различные устройства. Вы можете бесплатно скачать руководство по оборудованию нашего продукта на manualshive.com. Это обязательно поможет вам максимально эффективно использовать все функции и возможности этой серии продуктов."

Поделиться
Скачать
background image

phyCORE-OMAP44xx

Part II: PCM-959/phyCORE-OMAP44xx Carrier Board

L-760e_1   © PHYTEC Messtechnik GmbH 2012

81

2.1  Introduction

PHYTEC phyCORE-OMAP44xx Carrier Boards are fully equipped with all mechanical and electrical components
necessary for the speedy and secure start-up and subsequent communication to and programming of applicable
PHYTEC System on Module (SOM) modules. phyCORE-OMAP44xx Carrier Boards are designed for evaluation,
testing and prototyping of PHYTEC System on Modules in laboratory environments prior to their use in customer
designed applications.

The phyCORE-OMAP44xx Carrier Board provides a flexible development platform enabling quick and easy
start-up and subsequent programming of the phyCORE-OMAP44xx System on Module. The carrier board design
allows easy connection of additional expansion boards featuring various functions that support fast and
convenient prototyping and software evaluation.

The phyCORE-OMAP44xx Carrier Board supports the following features for the phyCORE-OMAP44xx modules:

•

Power supply circuits to supply the phyCORE-OMAP44xx and the peripheral devices of the carrier board

•

Power over Ethernet (PoE)

•

Full featured 4 line RS-232 transceiver supporting UART2 of the phyCORE-OMAP44xx with data rates of up
to 120 kbps, hardware handshake and RS-232 connector

•

Second RS-232 connector providing the signals of the RS-232 transceiver on the phyCORE-OMAP44xx and
thus allowing communication via UART3 of the OMAP44xx at RS-232 level

•

Four USB Host interfaces available at a standard USB A connector, as well as at the display and PEB
connectors

•

USB OTG interface brought out to a standard USB Mini-AB connector

•

10/100 Mbps Ethernet interface with Power over Ethernet

•

Complete Audio interface available at three 3.5 mm audio jacks 

•

Phytec Display Interface (PDI) (LVDS display interface with separate connectors for data lines and display /
backlight supply voltage) supporting either the Display Serial Interface (DSI), or the parallel display
interface of the OMAP44xx

•

Circuitry to allow dimming of a backlight

•

Touchscreen interface for use of 4 wire resistive touch screens

•

Two parallel camera interface connectors compatible to PHYTEC's phyCAM-P camera interface standard
including an I

2

C bus for camera control. One connector providing connectivity to the secondary camera

interface (CSI2-B/CSI22) of the OMAP44xx for 8-bit-wide camera signals. Second connector to connect to
the parallel camera interface of the OMAP4460 which supports selection between 8-bit and 10-bit-wide data
signals

•

Additional 30-pin pin header row for development purposes, connecting to the parallel camera interface of
the OMAP4460 

•

Two Secure Digital Memory / MultiMedia Card slots

•

Two extension connectors for customer prototyping purposes. Both compatible with PHYTEC's extension
board (PEB) interface standard featuring one USB, one I

2

C and one SPI interface, as well as one GPIO/IRQ

at either connector

•

DIP-Switch to configure the boot options for the phyCORE-OMAP44xx module

•

Holder for backup battery to keep alive the real-time clock and other secure registers of the PMIC on the
phyCORE-OMAP44xx

Содержание phyCORE-OMAP44 Series









































































































































































Отзывы:

Нет отзывов

Похожие инструкции для phyCORE-OMAP44 Series

ECS G41T-M13 Manual preview
G41T-M13
Бренд: ECS Страницы: 52
IEI Technology WAFER-PV-D4253 User Manual preview
WAFER-PV-D4253
Бренд: IEI Technology Страницы: 140
Analog Devices Linear DC2681A-A Demo Manual preview
Linear DC2681A-A
Бренд: Analog Devices Страницы: 8
ECS A55F-M2 V.2.0 User Manual preview
A55F-M2 V.2.0
Бренд: ECS Страницы: 74
Supero H8DCT-F User Manual preview
H8DCT-F
Бренд: Supero Страницы: 78
Fastfame 9W AP Series User Manual preview
9W AP Series
Бренд: Fastfame Страницы: 41
Anadigm AnadigmApex AN231K04-DVLP3 Manual preview
AnadigmApex AN231K04-DVLP3
Бренд: Anadigm Страницы: 16
Gigabyte GA-A75M-D2H User Manual preview
GA-A75M-D2H
Бренд: Gigabyte Страницы: 96
Microchip Technology PICDEM Quick Start Manual preview
PICDEM
Бренд: Microchip Technology Страницы: 2
Gigabyte GA - 686LX3 Manual preview
GA - 686LX3
Бренд: Gigabyte Страницы: 18
Avalue Technology EEV-EX14A1.1 User Manual preview
EEV-EX14A1.1
Бренд: Avalue Technology Страницы: 29
Gigabyte GA-8IPE1000MT User Manual preview
GA-8IPE1000MT
Бренд: Gigabyte Страницы: 96
Intel D845EPI Product Manual preview
D845EPI
Бренд: Intel Страницы: 87
A-Trend 6253M Manual preview
6253M
Бренд: A-Trend Страницы: 44
Supermicro MBD-X11SCH-F-O User Manual preview
MBD-X11SCH-F-O
Бренд: Supermicro Страницы: 119
Supero Supero X9DRW-7TPF User Manual preview
Supero X9DRW-7TPF
Бренд: Supero Страницы: 119
LiteOn NA121 User Manual preview
NA121
Бренд: LiteOn Страницы: 38
Texas Instruments ADS54J42 User Manual preview
ADS54J42
Бренд: Texas Instruments Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды