Phytec phyCORE-ADuC812, Быстрый старт

Страница: 77 / 86

Debugging
© PHYTEC Meßtechnik GmbH 2002 L-462e_2
73
•
Go to the C51 tabsheet and erase all defines from the Define: input
field and adjust the optimization to your needs.
•
Click on the OK button to save the settings.
•
Click on the Rebuild all target files icon to compile and
link your project.
•
Download the created Debug.hex file (located in
C:\PHYBasic\pC-ADuC812\Demos\Keil\Debug) to the Flash
memory. For general download procedure information refer to
sections 2.2 through 2.4.
•
Start HyperTerminal and connect to the target hardware using the
following COM parameters: Bits per second = 9.600;
Data bits = 8; Parity = None; Stop Bits = 1; Flow Control = None.
•
Press the Reset button S2 on the Development Board to start the
program.
•
Now you can watch your final debug example execute.