Phytec phyCORE-ADuC812 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 86

background image

phyCORE-ADuC812

© PHYTEC Meßtechnik GmbH 2002 L-462e_2

In this manual are descriptions for copyrighted products that are not explicitly
indicated as such. The absence of the trademark (



) and copyright (



) symbols

does not imply that a product is not protected. Additionally, registered patents and
trademarks are similarly not expressly indicated in this manual.

The information in this document has been carefully checked and is believed to be
entirely reliable. However, PHYTEC Meßtechnik GmbH assumes no
responsibility for any inaccuracies. PHYTEC Meßtechnik GmbH neither gives any
guarantee nor accepts any liability whatsoever for consequential damages resulting
from the use of this manual or its associated product. PHYTEC Meßtechnik
GmbH reserves the right to alter the information contained herein without prior
notification and accepts no responsibility for any damages which might result.

Additionally, PHYTEC Meßtechnik GmbH offers no guarantee nor accepts any
liability for damages arising from the improper usage or improper installation of
the hardware or software. PHYTEC Meßtechnik GmbH further reserves the right
to alter the layout and/or design of the hardware without prior notification and
accepts no liability for doing so.



Copyright 2002 PHYTEC Meßtechnik GmbH, D-55129 Mainz.

Rights - including those of translation, reprint, broadcast, photomechanical or
similar reproduction and storage or processing in computer systems, in whole or in
part - are reserved. No reproduction may occur without the express written
consent from PHYTEC Meßtechnik GmbH.

EUROPE

NORTH AMERICA

Address:

PHYTEC Technologie Holding AG
Robert-Koch-Str. 39
D-55129 Mainz
GERMANY

PHYTEC America LLC
203 Parfitt Way SW, Suite G100
Bainbridge Island, WA 98110
USA

Ordering
Information:

+49 (800) 0749832

[email protected]

1 (800) 278-9913

[email protected]

Technical
Support:

+49 (6131) 9221-31

[email protected]

1 (800) 278-9913

[email protected]

Fax:

+49 (6131) 9221-33

1 (206) 780-9135

Web Site:

http://www.phytec.de

http://www.phytec.com

2nd Edition: July 2002

«
1
2
3
4
...
»

Содержание phyCORE-ADuC812























































































Отзывы:

Нет отзывов

Похожие инструкции для phyCORE-ADuC812

870 Extreme3 R2.0

Бренд: ASROCK Страницы: 17

Бренд: NXP Semiconductors Страницы: 12

Бренд: JETWAY Страницы: 46

Бренд: JETWAY Страницы: 46

Бренд: Gigabyte Страницы: 44

Бренд: AOpen Страницы: 8

Gamefisher 298.585130

Бренд: Sears Страницы: 23

Бренд: AOpen Страницы: 8

Бренд: ASROCK Страницы: 39

Бренд: Dynatem Страницы: 57

Бренд: Intel Страницы: 36

LMQ61460EVM-400K

Бренд: Texas Instruments Страницы: 20

Qseven FS700 Series

Бренд: DFI Страницы: 18

Бренд: DFI Страницы: 46

RouterBOARD 111

Бренд: MikroTik Страницы: 2

S870 EXTREME3QVL - LIST

Бренд: ASROCK Страницы: 3

P67 PRO3 SE - ANNEXE 409

Бренд: ASROCK Страницы: 277

Бренд: Yamaha Страницы: 50

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды