Phytec phyBOARD Regor AM335x, Инструкция по применению

Страница: 18 / 48

phyBOARD-Regor AM335x [PB-01802-xxx]
4

PHYTEC Messtechnik GmbH 2018 L-823e_2
2 Accessing the phyBOARD-Regor Features
PHYTEC phyBOARD-Regor is fully equipped with all mechanical and electrical components
necessary for a speedy and secure start-up.
2.1 Overview of the phyBOARD-Regor Peripherals
The phyBOARD-Regor is depicted in
Figure 2
. It features many different interfaces and is
equipped with the components listed in
Table 2
and
Table 3
. For a more detailed
description of each peripheral, refer to the appropriate chapter listed in the applicable
table.
Figure 3
highlights the location of each peripheral for easy identification.
2.1.1 Connectors and Pin Header
Table 2
lists all available connectors on the phyBOARD-Regor
. Figure 3
highlights
the location of each connector for easy identification.
Reference
Designator
Description See Section
X1
Power supply 12 V – 24 V (1×5 positions Phoenix Contact
MINI COMBICON connector 3.5 mm pitch)
2.2.1.1
X2
4 x digital input/output (1×5 positions Phoenix Contact
MINI COMBICON connector 3.5 mm pitch)
2.2.7
X3
CAN / RS-485 connector (UART1) (1×5 positions Phoenix
Contact MINI COMBICON connector 3.5 mm pitch)
2.2.2
2.2.3
X4 USB On-The-Go connector (USB Micro-AB)
2.2.5
X5
RS-232 (UART0 and UART2) (1×5 positions Phoenix
Contact MINI COMBICON connector 3.5 mm pitch)
2.2.2
X6 Expansion connector (2×30 socket connector 2 mm pitch)
3.1
X7
Card Edge connector to incorporate DIN rail bus
connectivity with RS-485 interface (UART1) or CAN
interface (CAN0)
2.2.8
X9
Ethernet 0/1 connector (dual RJ45 with speed and link
LED)
2.2.4
X11 Secure Digital / Multi Media Card (Micro-slot)
2.2.6
X64
phyCORE-Connector (1x50 pin and 1x60 pin Samtec
connector)
4
Table 2: phyBOARD-Regor Connectors and Pin Headers