phyBOARD-Regor AM335x [PB-01802-xxx]
vi
PHYTEC Messtechnik GmbH 2018 L-823e_2
Abbreviation
Definition
Sx
User button Sx (e.g. S1, S2) refers to the available user buttons or DIP
switches on the CB
Sx_y
Switch y of DIP switch Sx; refers to the DIP switch on the carrier board
VSTBY
SOM standby voltage input
Table 1:
Abbreviations and Acronyms used in this Manual (continued)
At this icon you might leave the path of this Application Guide.
This is a warning. It helps you to avoid annoying problems.
You can find useful supplementary information about the topic.
The BSP delivered with the phyBOARD-Regor AM335x usually includes
drivers and/or software for controlling all components such as interfaces,
memory, etc. Therefore, programming close to hardware and register
level is not necessary in most cases. For this reason, this manual contains
no detailed description of the controller’s registers. Please refer to the
AM335x Technical Reference Manual
if such information is needed to
connect customer designed applications
Beginning with BSP version AM335x-PD14.1-rc1, it is possible to
configure the BSP in regards to the hardware configuration. This allows
the user to easily adapt the BSP if an expansion board is attached,
removed or exchanged.
