2. General notes
2.1 Notes on these assembly instructions
These assembly instructions are documentation which is only valid for the electric cylinder
described and are intended for the manufacturer of the end product into which this partly
completed machinery is to be installed.
We wish to explicitly point out that the manufacturer of the end product must produce operating
instructions for the end user containing all the functions and hazard warnings of the end product.
This also applies to installation in a machine. In this case, the manufacturer of the machine is
responsible for the relevant safety devices, checks, monitoring potential crushing and shearing
points and the documentation.
These assembly instructions will help you:
•
•
•
to avoid hazards,
to prevent downtime,
and to guarantee and increase the lifetime of this product.
Hazards warnings, safety regulations and the information in these assembly instructions are to be
observed at all times.
These assembly instructions must be read and applied by everyone who works with the product.
Commissioning is forbidden until the machine complies with the provisions of EC Directive
2006/42/EC (Machinery Directive). Before bringing onto the market, this must comply with the CE
Directives, including documentation.
We hereby inform any re-user of this partially completed machine/partial machine/machine parts
explicitly of its obligation to expand and complete this documentation. In particular, when installing
or attaching electrical components and/or drives, the re-user is to complete a
CE declaration of conformity.
Our declaration of incorporation becomes invalid automatically.
32
