7. Life phases
•
Connect to the respective controller.
•
Perform the test run / initial run without load and check the function of the system.
7.7 Maintenance
The electric cylinder generally does not require servicing, but it is not exempt from wear and tear.
You can recognise possible wear on faulty functions, increased play of the moving parts or unusual
sounds that originate from the electric cylinder.
The replacement of worn parts must only be carried out by the manufacturer. The electric cylinder must
be sent to up for this purpose. This means that in the case of wear and non-replacement of worn
product parts, the safety of the product could be compromised.
All work with the electric cylinder may only be carried out in accordance with these instructions. The
device may only be opened by authorized specialist personnel.
If there is a fault in the electric cylinder, we recommend contacting the manufacturer and/or
sending the electric cylinder to be repaired.
•
When working on the electrics or the electrical elements, they must be first disconnected from the
supply to prevent any risk of injury.
Unauthorised modifications or changes to the electric cylinder are not permitted for safety
reasons.
Safety-relevant devices must be inspected for proper function and completeness at regular
intervals.
•
•
52
