MEGAMAT XS
Maintenance
73115 4.0
25
9. Maintenance
You should only use spare parts which have been manufactured or approved by DewertOkin.
Only these parts will guarantee a sufficient level of safety.
9.1
Maintenance
Type of check
Explanation
Time interval
Check the function and
safety of the electrical sys-
tem.
A qualified electrician should carry
out this inspection. (Refer to the
"Electrical connection" section in
the "Installation" Chapter.)
Periodic inspections can
be carried out at intervals
based on the risk as-
sessment which you con-
duct for your end product.
Periodic visual inspection for
housing damage.
Check the housing for breaks or
cracks. The IP-class protection will
be impaired by any breakage or
cracks.
At least every six months.
Periodic visual inspection of
the plug-in connections and
electrical access points for
damage.
Check that all electrical cables and
connections are firmly seated and
correctly positioned.
At least every six months.
Periodic visual inspection for
cable damage.
Check the connecting cables for
pinching or shearing. Also check
the strain relief and kink protection
mechanisms, in particular after any
mechanical load.
At least every six months.
Periodic functional test of the
end switches.
Move the drive to the end positions
in order to test the end switches.
At least every six months.
9.2
Cleaning and care
The MEGAMAT XS drive was designed so that it would be easy to clean. Its smooth surfaces sim-
plify the cleaning process.
NOTICE
Never clean the drive in an automated washing system or with a high-pressure cleaner.
Do not allow fluids to penetrate the drive. Damage to the system could result.
Do not use a cleanser that contains benzene, alcohol or similar solvents.
1
Always disconnect the mains power plug of the control unit or double drive (and the battery plug
if present) before you start to clean the unit!
2
Clean the MEGAMAT XS drive with a moist cloth.
3
Make sure that you do not damage the drive's connecting cable.
