Description
MEGAMAT XS
14
73115 4.0
4.1.1
Stroke pipe options
There are two types of stroke pipes available for different types of applications. The stroke pipe can
be screwed onto the spindle screw or it can be mounted unattached. The drive only exerts pushing
force when the stroke pipe is mounted loosely (unattached). The motions of the drives for these
two versions are shown in the following illustrations.
CAUTION
If the stroke pipe is unattached, then the end product must be designed to prevent the
stroke pipe from coming out during operations. This can be accomplished by imple-
menting a fixed end-stop mechanism (refer to the "Safety notices to observe during
installation" in the "Installation" chapter).
Figure 4
Loose fastening nut (stroke pipe not secured): only pushing forces
Figure 5
Stroke pipe screwed onto the spindle screw (attached): both pushing and pulling
forces
Drive motion
Drive motion
