Phoenix Contact UM IA THERMOMARK X1.1, Руководство пользователя

Страница: 99 / 130

Description of Operating Elements
103180_00_ia PHOENIX CONTACT
3-11
English
3.4.5 Interfaces
Pause reprint
Prints another tube piece with the information from the previous print job by
pressing the
pause button. This function can be executed until the print buffer is
cleared with the cancel button.
Off
Barcode error On
: In the event of faulty barcode contents or faulty barcode size specifications,
printing is interrupted.
On
Width ASCII dump
With the
Automatic
setting, the maximum printing width is used to print out the
control sequences arriving at the printer.
Automatic
Table 3-6 Parameters of the
Setup
>
Print param
. menu
Parameter Meaning Default
These settings are set to optimum settings and must not be modified.
Table 3-7 Parameters of the
Setup
>
Interfaces
menu
Parameter Meaning Default
Default card slot
Define the primary card slot.
CompactFl
ash
Character set
Select the character set table for adaptation to the computer system used.
Windows
1252
RS232 Baud rate
and
Handshake
interface parameters for data transfer via the V.24
(RS-232) serial interface.
RS232
Ethernet
Configuration parameters for the Ethernet interface card.
>
DHCP
Method for assigning the IP address.
On
: Dynamic assignment of the IP address by the DHCP server
Off
: Direct assignment of the IP address by the operator
On
>
Gateway
Connection address between the local network and other networks. The IP
address of the computer (router) in the local network through which the
connection can be established is used for this. The address of the router can
also be transferred via DHCP.
Off
>
Network error
In the event of problems with the network connection, the printer switches to the
error state.
Off