Phoenix Contact UM IA THERMOMARK X1.1, Руководство пользователя

Страница: 119 / 130

Test Functions
103180_00_ia PHOENIX CONTACT
5-5
English
5.4 Font List
The
Font list
function prints the most important parameters relating to the fonts
available in the printer in table format. The table contains both printer-internal fonts and
fonts installed on it. The printout will be printed at the heat level and print speed set in the
Setup
>
Print param
. menu.
• Load printable media (labels, continuous paper) that extends over the entire print width
of the printer.
• Load transfer foil of the maximum width.
• Press the menu button.
• Press the
X
button until you access the
Test
item.
• Press T to confirm your selection.
• Press the
X
button until you access the
Font list
item.
• Press T to confirm your selection.
• Start printing with
↵
.
The printout is started. You can abort the printout with the cancel button.
Figure 5-2 Font list (example)
The parameters have the following meanings:
The printer will not sense gaps between labels, so continuous media is best suited for
this printout.
Table 5-3 Parameters in the
Font list
Column Meaning
No. Font ID number required for programming (command T)
Name Name under which the font is saved in the printer
Type Type of font creation. This parameter provides information about the font's variability and is
important for programming (command T).
Description Font descriptions: size, font family. The printout uses the corresponding font.