Phoenix Contact UM IA THERMOMARK X1.1, Руководство пользователя

Страница: 116 / 130

THERMOMARK X1.1
5-2
PHOENIX CONTACT 103180_00_ia
5.2 Short Status
The
Short status
menu provides an overview of important status information on the
printer's display.
• Press the menu button .
• Press
T
to confirm your selection.
• Press the X button until you access the
Short status
item.
• Use the
S
and
T
buttons to scroll through the individual rows.
You can use the
↵
button to exit the
Short status
menu.
The configuration parameters below are displayed in the
Short status
menu:
5.3 Status Print
The
Status print
function prints a test image containing information about the
configuration and status of the printer. The printout will be printed at the heat level and print
speed set in the
Setup
>
Print param.
menu.
• Load printable media (labels, continuous paper) that extends over the entire print width
of the printer.
• Load transfer foil of the maximum width.
• Press the menu button.
• Press the X button until you access the
Test
item.
• Press
T
to confirm your selection.
• Press the X button until you access the
Status print
item.
• Press
T
to confirm your selection.
• Start printing with
↵
.
The printout is started. You can abort the printout with the cancel button.
Table 5-1 Display in the
Short status
menu
Row Meaning Example
1 Printer type
THERMOMARK X1.1
2 Version number of the printer operating system (firmware)
Firmware V3.02
3 Creation date of the firmware
(MAR 2 2006)
4 Version number of the bootloader
Bootloader V1.09
5 Bootloader creation date
(FEB 20 2006)
6 Revision number of the CPU PCB
PCB Rev. 04
7 Revision number of the FPGA (Field Programmable Gate Array)
FPGA Rev. 2
8 Resolution of the installed thermal printhead
TPH 600 dpi, 2496 dots
9 Total printed paper length in the thermal transfer mode
Transfer 181.44 m
10 Total printed paper length in the direct thermal mode
Thermal 13.17 m
11 IP address of the label printer when connected to a network
255.255.255.255
The printer will not sense gaps between labels, so continuous media is best suited for
this printout.