THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
4
Maintenance and troubleshooting
4.1
Cleaning the device
•
Protect the device from dust and other contaminants. If the device is not being used,
cover it.
•
Wipe down the device with a duster. The duster can either be dry or dampened with a
mild cleaning agent.
•
Remove dust and paper fluff in the printing area with a soft brush or vacuum cleaner.
4.2
Cleaning the photoelectric barrier for labels
Figure 4-1
Cleaning photoelectric barrier for labels
•
Remove the print media and the ink ribbon from the printer.
•
Loosen the screw (2) with the supplied Allen key.
•
Press and hold down the button (1).
•
Slowly pull the photoelectric label barrier outwards by the handle. Make sure not to ten-
sion the photoelectric barrier cable.
•
Clean the photoelectric label barrier and the sensor slit (3) with a cotton bud that has
been soaked with alcohol.
•
Hold the photoelectric label barrier by the handle and push it back as far as it will go.
•
Retighten the screw.
•
Reload the print media and the ink ribbon.
DANGER: Risk of electric shock
Disconnect the device from the power grid before carrying out any maintenance work.
3
2
1
