Starting up the printer
107815_en_00
PHOENIX CONTACT
English
2.4
Loading media and printing
2.4.1
Loading media
Positioning media roll on the media hub
Figure 2-4
Inserting media roll
Inserting media roll
•
Open the cover.
•
Release the margin stop (1). To do this, turn the green adjustable ring counterclockwise
until the arrow points to the
symbol.
•
Pull the margin stop out of the media hub.
•
Push the media roll onto the media hub in such a way that the media side to be printed
faces upwards.
•
Put the margin stop back on. Push it until both margin stops are touching the media roll.
Here a definite resistance can be felt when pushing.
•
Clamp down the margin stop. To do this, turn the adjustable ring clockwise until the ar-
row points to the
symbol.
•
Unwind a lengthy strip of the print media.
Loading media into the
printhead
•
To lift the printhead, turn the green lever (2) counterclockwise.
•
Turn the red knurled screw (3) until the media fits between the red guides.
•
Push the media toward the printing unit.
•
Move the guides close to the edges of the media. The print media must not get stuck,
however.
•
Close the printhead.
2
3
1
