THERMOMARK ROLLMASTER
PHOENIX CONTACT
107815_en_00
2.3
Connecting device
Mains and computer connections
Figure 2-2
Connections on the rear of the device
1
Power supply switch
2
Mains socket
3
SD card slot
4
Two USB master interfaces for keyboard, scanner, USB memory and Bluetooth
adapter
5
USB slave interface, full-speed
6
Ethernet 10/100 Base T
7
RS-232 interface
8
USB master interface for keyboard, scanner, USB memory and Bluetooth adapter
Ensure that when establishing electrical connections, all devices (printer, computer etc.) are
switched off. If you disconnect devices, the devices should again be switched off.
2.3.1
Connecting the power supply unit
The THERMOMARK ROLLMASTER is designed for power grids from 100 to 240 V AC.
Only use the supplied wide-range power supply unit.
•
Slide the appropriate adapter onto the power supply unit.
•
Insert the connecting cable of the power supply unit into the socket of the device.
•
Connect the power supply unit to a socket.
1
3
2
4
5
6
7
8
