Spanning Tree Protocol (STP) Commands
8039_en_01
PHOENIX CONTACT
2-7
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the
<slot/port>
parameter to transmit a BPDU from
a specified interface, or use the
all
keyword to transmit BPDUs from all interfaces. This
command forces the BPDU transmission when you execute it, so the command does not
change the system configuration or have a “no” version.
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The
<name>
is a string of up to 32 characters.
Default
disabled
Format
no spanning-tree bpduflood
Mode
Interface Config
Default
disabled
Format
spanning-tree bpduguard
Mode
Global Config
Default
disabled
Format
no spanning-tree bpduguard
Mode
Global Config
Format
spanning-tree bpdumigrationcheck
{<slot/port> | all}
Mode
Global Config
Default
base MAC address in hexadecimal notation
Format
spanning-tree configuration name
<name>
Mode
Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx