Phoenix Contact FL SWITCH GHS 12G/8 Скачать руководство пользователя страница 167

Страница: 167 / 242

System Information and Statistics Commands

8039_en_01

PHOENIX CONTACT

5-13

Use this command to display or capture the current setting of different protocol packages

supported on the switch. This command displays or captures commands with settings and

configurations that differ from the default value. To display or capture the commands with

settings and configurations that are equal to the default value, include the

[all]

option.

The output is displayed in script format, which can be used to configure another switch with

the same configuration. If the optional

<scriptname>

is provided with a file name extension

of “.scr”, the output is redirected to a script file.

This command captures the current settings of OSPFv2 and OSPFv3 trapflag status:

•

If all the flags are enabled, then the command displays

trapflags all

•

If all the flags in a particular group are enabled, then the command displays

trapflags

<group name>

all

•

If some, but not all, of the flags in that group are enabled, the command displays

trapflags

<groupname>

<flag-name>.

show sysinfo

This command displays switch information.

Note:

Show running-config does not display the User Password, even if you set one different from the default.

Note:

If you issue the

show running-config

command from a serial connection, access to the switch through

remote connections (such as Telnet) is suspended while the output is being generated and displayed.

Note:

If you use a text-based configuration file, the

show running-config

command will only display configured

physical interfaces, i.e. if any interface only contains the default configuration, that interface will be skipped from

the

show running-config

command output. This is true for any configuration mode that contains nothing but

default configuration. That is, the command to enter a particular config mode, followed immediately by its ‘exit’

command, are both omitted from the

show running-config

command output (and hence from the startup-

config file when the system configuration is saved.)

Format

show running-config

[all | <scriptname>]

Mode

Privileged EXEC

Format

show sysinfo

Mode

Privileged EXEC

Term

Definition

Switch Description

Text used to identify this switch.

System Name

Name used to identify the switch.The factory default is blank. To configure the system name, see

“snmp-server” on page 31

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

Содержание FL SWITCH GHS 12G/8



















































































































































































































































Результаты поиска

Содержание FL SWITCH GHS 12G/8

Отзывы:

Phoenix Contact FL SWITCH GHS 12G/8, Руководство пользователя, Страница: 167 / 242

Результаты поиска

Содержание FL SWITCH GHS 12G/8

Отзывы: