FL SWITCH GHS CLI
5-14
PHOENIX CONTACT
8039_en_01
show tech-support
Use the
show tech-support
command to display system and configuration information
when you contact technical support. The output of the
show tech-support
command
combines the output of the following commands:
•
show version
•
show sysinfo
•
show port all
•
show logging
•
show event log
•
show logging buffered
•
show trap log
•
show running config
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the
show running-config
and
show running-config all
commands. The terminal length size is either zero or a number in the range of 5 to 48. After
the user-configured number of lines is displayed in one page, the system prompts the user
for
--More-- or (q)uit
. Press
q
or
Q
to quit, or press any key to display the next set of
<
5-48
> lines. The command
terminal length 0
disables pagination and, as a result, the
output of the
show running-config
command is displayed immediately.
no terminal length
Use this command to set the terminal length to the default value.
System Location
Text used to identify the location of the switch. The factory default is blank. To configure the system
location, see
“snmp-server” on page 31
.
System Contact
Text used to identify a contact person for this switch. The factory default is blank. To configure the
system location, see
“snmp-server” on page 31
.
System ObjectID
The base object ID for the switch’s enterprise MIB.
System Up Time
The time in days, hours and minutes since the last switch reboot.
MIBs Supported
A list of MIBs supported by this agent.
Term
Definition
Format
show tech-support
Mode
Privileged EXEC
Default
24 lines per page
Format
terminal length <
0
|
5-48
>
Mode
Privileged EXEC
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx