User Account Commands
8039_en_01
PHOENIX CONTACT
6-23
no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified user as
readwrite
for the
“admin” user and
readonly
for all other users. The
<username>
value is the user name for
which the specified access mode will apply.
users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified user. The
valid authentication protocols are
none
,
md5
or
sha
. If you specify
md5
or
sha
, the login
password is also used as the snmpv3 authentication password and therefore must be at least
eight characters in length. The
<username>
is the user name associated with the
authentication protocol. You must enter the
<username>
in the same case you used when
you added the user. To see the case of the
<username>
, enter the
show users
command.
no users snmpv3 authentication
This command sets the authentication protocol to be used for the specified user to
none
. The
<username>
is the user name for which the specified authentication protocol is used.
users snmpv3 encryption
This command specifies the encryption protocol used for the specified user. The valid
encryption protocols are
des
or
none.
If you select
des
, you can specify the required key on the command line. The encryption key
must be 8 to 64 characters long. If you select the
des
protocol but do not provide a key, the
user is prompted for the key. When you use the
des
protocol, the login password is also used
as the snmpv3 encryption password, so it must be a minimum of eight characters. If you
select
none
, you do not need to provide a key.
The
<username>
value is the login user name associated with the specified encryption. You
must enter the
<username>
in the same case you used when you added the user. To see
the case of the
<username>
, enter the
show users
command.
Format
no users snmpv3 accessmode
<username>
Mode
Global Config
Default
no authentication
Format
users snmpv3 authentication
<username> {none | md5 | sha}
Mode
Global Config
Format
no users snmpv3 authentication
<username>
Mode
Global Config
Default
no encryption
Format
users snmpv3 encryption
<username> {none | des[key]}
Mode
Global Config
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx