Phoenix Contact FL NAT SMN 8TX, Руководство пользователя, Страница: 8 / 102

FL NAT SMN 8TX(-M)
1-2
PHOENIX CONTACT 7966_en_04
All information Clear information

Two LEDs per port with switchable information ensure that you always have sufficient local
information. A web server and an SNMP agent are provided for diagnostics, maintenance,
and configuration via the network. A terminal access point can be used for local operation.
Port mirroring Port mirroring can be used to monitor data traffic on the network connections or as an
important service function.
Features and fields of application of the FL NAT SMN 8TX(-M)
– Use of different routing modes

- Virtual NAT,

- 1:1 NAT

- Static routing
– Increased network performance by filtering data traffic:

- Local data traffic remains local.

- The data volume in network segments is reduced.
– Easy network expansion and network configuration.
– Coupling copper segments with different transmission speeds.

Automatic detection of 10 Mbps or 100 Mbps data transmission speed with
autocrossing.
– Support of various topologies and meshed structures as well as ring topologies with
special ring detection.
– Configuration of the switch using web-based management, SNMP or locally via an

RS-232 interface.
– Port mirroring
– Topology detection using LLDP (Link Layer Discovery Protocol).
– Address assignment via BootP, DHCP or statically.
– Diagnostic/status indicators

Important information is displayed directly on the device. Each port has two LEDs. The
"LNK" LED always indicates the "LINK", while the other LED display is set with the
"MODE" function switch.
– MODE switch for LEDs

The MODE switch can be used to specify which information is displayed by the second
port-specific LED. The three LEDs below the switch indicate the selected mode. This
information is then displayed by all port-specific LEDs (see also example on page 1-4).
– Mini-DIN RS-232

RS-232 interface in Mini-DIN format for local configuration via the serial interface.
– Supply voltage connection

The supply voltage can be connected via four positions of the 6-pos. COMBICON
connector (redundancy is optional); the floating alarm contact can be connected via the
remaining two positions.