Phoenix Contact FL NAT SMN 8TX, Руководство пользователя, Страница: 65 / 102

Configuration and diagnostics
7966_en_04 PHOENIX CONTACT
4-41
Basic switch configuration
Figure 4-39 IP configuration in the user interface
As well as displaying the set MAC address, this screen can be used to view or modify the IP
parameters.
This user interface screen can be used to determine the addressing mechanism or to trigger
a device restart.
4.4.2.3 IP address assignment of the WAN port via RS-232
In order for the switch to perform its function, it requires an IP address, which can be
assigned via the serial interface. If the switch already has an IP address, it uses this existing
IP address following a restart if it does not receive another address via BootP or RS-232.
In order to set the IP parameters, the “Static” option must be selected for “IP Parameter
Assignment”.
All settings are applied using “APPLY”, but are not saved permanently. Use the “SAVE”
function to save the active configuration settings permanently.
IP address assignment via RS-232 is only supported by the WAN port (port 1).