Phoenix Contact FL NAT SMN 8TX, Руководство пользователя, Страница: 39 / 102

Configuration and diagnostics
7966_en_04 PHOENIX CONTACT
4-15
Save current
configuration
The active configuration together with the corresponding configuration name can be saved
here by entering a valid password.
Figure 4-15 “Save current configuration” web page
Set default upon delivery This option can be used to reset the switch to its default settings (default upon delivery) by
entering a valid password.
Figure 4-16 “Set default upon delivery” web page
Load the last stored con-
figuration
The last configuration stored on the device can be reactivated. All modifications made to the
configuration since it was last saved are lost.
Figure 4-17 “Load the last stored configuration” web page
If the new configuration was not activated by a reset after a configuration download, the
“Save current configuration” command overwrites the previously loaded configuration
and instead saves the active configuration of the FL NAT SMN 8TX(-M).
WBM can only be called using a valid IP address. Once the NAT router has been reset to
its default settings, it is in the default state upon delivery.