Phoenix Contact 2986229 Скачать руководство пользователя

Страница: 51 / 102

SAFECONF configuration software

103503_en_03

PHOENIX CONTACT

4-1

SAFECONF configuration software

4.1

Installing SAFECONF

The installation routine for the configuration software also includes the installation of the

required driver for the USB interface. This driver is required to enable communication

between the PC on which SAFECONF is installed and the PSR-TRISAFE-S safety module.

Proceed as follows:

If you have

downloaded

the configuration software, extract the downloaded file and

start the installation program (setup file).

If you have purchased the

PSR-SAFECONF-BOX

, insert the supplied CD in the drive.

A graphical menu opens. Select "Install software" to start the installation program.

(If you have deactivated the auto start option on your computer, open the "SAFECONF"

folder on the CD and execute the setup file.)

Select the desired language for the installation routine. (This also sets the language for

the SAFECONF user interface, which is set when the software is started for the first

time.)

The installation program now guides you through the installation step by step.

Follow the on-screen instructions.

Once SAFECONF is installed, you will be prompted to install the drivers for the safety

module.

Follow the on-screen instructions.

In the Windows dialog box for driver installation, select "Install the software

automatically (recommended)".

Finally, a message appears indicating that the configuration software and drivers for the

safety module have been fully installed.

4.2

Overview of functions and features

The SAFECONF safe configuration software is used only for the configuration of the

PSR-TRISAFE-S safety module. The software supports the user in all operating phases,

from planning the application, through configuration to starting up the PSR-TRISAFE-S

safety module and compiling system documentation.

The following SAFECONF functions are available:

Creating the safety logic

–

Creation of the safety logic using a graphical connection editor. The circuit which the

safety module runs on is created by graphically linking safe functional blocks certified

according to the PLCopen specification via connecting lines and safe functions. Safe

functions range from logic operations such as AND, OR, etc., to timer and trigger

functions.

To ensure that the configuration software detects the safety module automatically and

correctly, the software must be fully installed on the computer before the device is

connected for the first time.

Содержание 2986229







































































































Результаты поиска

Содержание 2986229

Отзывы:

Похожие инструкции для 2986229

Бренды по названию

Популярные бренды

Phoenix Contact 2986229, Руководство пользователя

Результаты поиска

Содержание 2986229

Отзывы:

Похожие инструкции для 2986229

Бренды по названию

Популярные бренды