Phoenix Contact 2986229, Руководство пользователя

Страница: 25 / 102

System description
103503_en_03 PHOENIX CONTACT
2-9
Activating cross-circuit detection for the safety module inputs:
1. Open the parameter editor by double-clicking in the SAFECONF hardware editor.
2. Select the corresponding input.
3. In the selection box for this input, set "cross-circuit detection", as shown in the image
below for inputs 0 and 1.
Figure 2-5 Parameterizing cross-circuit detection for a module input
2.5 Diagnostic tools
The SAFECONF configuration software and the PSR-TRISAFE-S safety module provide
various tools that can be used to diagnose the active configuration on the safety module:
– Hardware diagnostics in the event of a safe functional block error
– Wiring check
– Status indicators on the safety module
– Online tool tips in the connection editor
Hardware diagnostics in
the event of a safe
functional block error
If a safe functional block detects an error, it sets its ERR error output to TRUE and the OUT
enable output to the safe status FALSE.
For additional information, refer to the descriptions of the safe functional blocks in the
SAFECONF online help, particularly in the corresponding "ERR output" help topic.
If the ERR output of a safe functional block is TRUE, all the inputs that are connected
directly to the inputs of this functional block flash on the safety module.
For an overview of the diagnostic and status indicators, please refer to Table 3-1 on
page 3-5.
Doppelklick
Double click
103503a016.eps