Phoenix Contact 1212463, Руководство по эксплуатации

Страница: 25 / 36

Troubleshooting
105555_en_07 PHOENIX CONTACT
25
English
Shaking out loose parts
• Check if there are any loose parts in the device.
• Shake the loose parts out of the device. Do not use any tool that
could damage the crimping tool.
• If a conductor is still sticking in the device, remove it as de-
scribed on Page 20.
Checking waste guide plates
• Check whether the two waste guide plates are undamaged.
• If a waste guide plate is bent, you must replace it (see
Page 27).
Switching on the crimping tool
• Reattach the service cover.
• Press the ON button.
The yellow indicator light flashes.
If the yellow indicator light lights up , follow the sequence for re-
lieving a blockage (see Page 22).
Inserting the taped ferrule
• Check if the taped ferrule is damaged.
• Detach damaged ferrules from the tape.
• Re-insert the taped ferrule (see Page 13).
• Reattach the waste container (see Page 13).
Loading the taped ferrule
• Press the ON button.
You hear a sound of movement and the green indicator light
flashes. The crimping tool is ready for use.
If the yellow indicator light lights up , follow the sequence for re-
lieving a blockage (see Page 22).