Phoenix Contact 1212463, Руководство по эксплуатации

Страница: 23 / 36

Troubleshooting
105555_en_07 PHOENIX CONTACT
23
English
Inserting the service tool in the shaft
• Insert the service tool with the plastic side straight into the shaft
as far as it will go.
• Press in the spring until the red indicator light goes out.
• Carefully pull the service tool out straight.
If there is a ferrule in the crimping die, it sticks to the service
tool.
It is possible that no ferrule has been caught. The crimping tool
detects this and continues with further measures for remedying
the fault.
The yellow indicator light flashes.
If the yellow indicator light flashes , no ferrule could be removed.
Follow the sequence for removing loose parts from the device (see
Page 24).
Inserting the taped ferrule
• Check if the taped ferrule is damaged.
• Detach damaged ferrules from the tape.
• Re-insert the taped ferrule (see Page 13).
• Reattach the waste container (see Page 13).
Loading the taped ferrule
• Press the ON button.
You hear a sound of movement and the green indicator light
flashes. The crimping tool is ready for use.