Hardware Tests
MCP9350i
11.
EN 29
11.20. Wireless Network Connection (802.11b/g)
11.20.1. Required Equipment
Wireless router/access point within range of the Media Center PC
11.20.2. Test Procedure
1.
In Windows XP, open the Wireless LAN client utility. (Select: Start > All Programs > Wireless LAN).
2.
Set-up a connection with the wireless access point: in the Site Survey section select Refresh and Connect with the access point.
Make sure that you enter the correct protection key if necessary.
3.
Select the Status section. Both link quality and signal strength should now be sufficiently high. (Maximum values are 52.0 Mbps and
100%).
11.20.3. Fail Procedure
-
Replace both antenna cables and antennas. See paragraphs 12.8.3 and 12.8.5.
-
Replace the WLAN card. See paragraph 12.8.1.
-
Replace the motherboard. See paragraph 12.16.9.
