Philips Saeco GranBaristo, Руководство по обслуживанию

Страница: 23 / 83

GRAN BARISTO 03 BRIEF INSTRUCTIONS
6/6
3.1.3. Customer menu in the Gran Baristo.
Display messages
“Espresso”
button
“Coffee”
button
“American Coffee”
button
“Cafè Crème”
button
“Aroma”
Pre-ground
coffee button
“Espresso Macchiato”
button
“Cappuccino”
button
“Latte Macchiato”
button
“Hot Milk”
button
“ESC”
button
“OK”
button
“MENU”
button
“Special Beverages”
button
“Stand-by”
button
“UP” and ”DOWN “
button
LCD Display
ADD COFFEE
Fill the coffee bean hopper.
Insert the coffee bean hopper
and/or beans lid.
Insert the water dispensing spout
to start dispensing. Press “ESC” to
exit.
Before beginning to dispense,
insert the milk carafe with the di -
spensing spout open.
The brew group must be inserted
into the machine.
Insert the coffee grounds drawer
and the internal drip tray.
Close the service door.
Remove the water tank and fill it.
You can fill the water tank also
through the dedicated hole on the
lid.
The machine needs the
“” water fi lter to be
replaced.
The red light fl ashes. Press any
button to exit the stand-by mode.
Take note of the code (E xx) shown on the display at the bottom and check out the
table “Error codes” (par.05 TROUBLESHOOTING) the type of error that occurred.
Open the service door and empty the internal drip tray.
Note: If this operation is performed when the machine is on, it will record the coffee
grounds drawer emptying and will reset the counter; therefore, it is necessary to emp -
ty the coffee grounds as well.
Empty the coffee grounds drawer.
Note:
The coffee grounds drawer
must be emptied only when the
machine requires it and with
the machine on. If the drawer is
emptied with themachine turned
off, the machine will not record the
emptying operation.
INSERT BREW GROUP
INSERT COFFEE
GROUNDS DRAWER
EMPTY COFFEE
GROUNDS DRAWER
CLOSE
FRONT DOOR
REFILL
WATER TANK
EMPTY DRIP TRAY
INSERT
BEAN CONTAINER
HOT WATER
INSERT
WATER SPOUT
CAPPUCCINO
INSERT THE CARAFE
WITH THE SPOUT
OPEN
RESTART TO SOLVE
The machine needs to be descaled.
Follow the steps described in the
“Descaling” chapter of this manual.
Please note that not descaling your
machine will ultimately make it stop
working properly. In this case repair
is NOT covered under your warranty.