Philips Saeco GranBaristo, Руководство по обслуживанию

Страница: 18 / 83

GRAN BARISTO 03 BRIEF INSTRUCTIONS
1/6
LCD Display
CREMA
COFFEE
CAFFE
“Espresso”
button
“Long Espresso ”
button
“Caffè Crema”
button
“Aroma”
Pre-ground
coffee button
“Espresso Macchiato”
button
“Cappuccino”
button
“Latte Macchiato”
button
“Hot Milk”
button
“ESC”
button
“OK”
button
“MENU”
button
“Special Beverages”
button
“Stand-by”
button
“UP” and ”DOWN “
button
“Coffee”
button
Display messages
BEANS CONTAINER EMPTY
ADD COFFEE BEANS
INSERT BREW GROUP
INSERT COFFEE
GROUNDS DRAWER
CLOSE
FRONT DOOR
CLOSE BEAN
CONTAINER LID
HOT WATER
INSERT
WATER SPOUT
PLACE MILK CARAFE
AND OPEN SPOUT
EMPTY COFFEE
GROUNDS DRAWER
WATER TANK EMPTY
ADD WATER
EMPTY INTERNAL
DRIP TRAY
DESCALE
Fill the coffee bean hopper.
Insert the coffee bean hopper
lid and/or beans lid.
Insert the water dispensing
spout to start dispensing. Press
“ESC” to exit.
Insert the milk carafe with the
dispenser open before starting
the dispensing.
The machine signals the need
to replace the water filter
“AquaClean”.
The machine is performing the
loading of the hydraulic circuit.
Wait for it to do so.
Machine descaling is needed.
Refer to the maintenance menu
to select and start the cycle.
The brew group must be inserted
into the machine.
Insert the coffee grounds drawer
and the internal drip tray.
Close the service door.
Remove the water tank and fill it.
You can fill the water tank also
through the dedicated hole on the
lid.
Open the service door and empty
the internal drip tray.
Empty the coffee grounds drawer.
Note: The coffee grounds drawer
must be emptied only when the
machine requires it and with
the machine on. If the drawer is
emptied with themachine turned
off, the machine will not record the
emptying operation.
3.1.1. Customer menu in the Gran Baristo BaseV2 and AvantiV2
PROFILE SAECO
0%
RESTART TO SOLVE
An event has occurred which requires the machine to be restarted. Take note of
the code (E xx) shown at the bottom. Turn off the machine, wait for 30 seconds
and turn it on again. If the problem persists, contact the Saeco hotline in your
country and quote the code shown in the display.
water circuit
priming